+86-511-86982255
sales@chinadiam.com
TCT circular saw blade for cutting formwork, aluminum and non-ferrous metals
| Diameter(mm) | Arbor(mm) | Teeth Number | Teeth Geometry | Teeth Angle | Teeth Thickness | Core Thickness | Silent Slot |
| 160 | 20 | 56 | TCG | -5 | 2.6 | 1.8 | no |
| 165 | 20 | 56 | TCG | -5 | 2.3 | 1.6 | no |
| 185 | 20 | 64 | TCG | -5 | 2.3 | 1.6 | no |
| 190 | 20 | 64 | TCG | -5 | 2.6 | 1.8 | no |
| 190 | 30 | 64 | TCG | -5 | 2.6 | 1.8 | no |
| 230 | 30 | 64 | TCG | -5 | 2.8 | 1.8 | yes |
| 250 | 30 | 80 | TCG | -5 | 2.8 | 1.8 | yes |
THE GEOMETRY OF THE TEETH
FLAT TOOTH (FT)The geometry of the teeth, in which the cutting edge of the tooth is sharpened rectilinearly without the formation of any corners. This form is used for longitudinal section. In addition, such teeth are used where the strength and speed of the cut is more important than the quality of the cut.
TRAPEZOIDAL-FLAT TOOTH (TCG)A tooth geometry in which a flat tooth alternates with several a higher trapezoidal tooth. Thanks to the removed from both higher teeth are formed on the chamfer along the upper edge accordingly, a deeper but slightly narrower incision than that of other people. flat teeth. As a result education is practically excluded chipped on brittle material.
VARIABLE TOOTH (ATB)The geometry of the teeth in which the cutting edge of the teeth has different sharpening angle, from 10° to 20°.This form of teeth is used in various works,but it is best suited for cross sections in a solid and soft wood.
HOLLOW TOOTH (HG)Geometry in which the teeth have a groove. This provides pure propyl melamine and other coated plateswithout the formation of chips and do not need to do preliminary cut.
